SN74LVTH162244-EP中文参数_产品功能_原装供应
SN74LVTH162244是一款16位缓冲器和线路驱动器,专为低压(3.3 v) VCC操作而设计,但具有为5 v系统环境提供TTL接口的能力。该设备可以用作四个4位缓冲区、两个8位缓冲区或一个16位缓冲区。该器件提供真输出和对称的激活-低输出-使能(OE)输入。
输出,其设计为源或吸收高达12 mA,包括等效22系列电阻,以减少过调和欠调。
有源总线保持电路将未使用或未驱动的输入保持在有效的逻辑状态。不建议在母线保持电路中使用上拉或下拉电阻。
当VCC在0 ~ 1.5 V之间时,设备在上电或下电过程中处于高阻抗状态。但是,为了确保1.5 V以上的高阻抗状态,OE\应通过上拉电阻连接到VCC;。
该器件完全适用于使用关闭和通电三状态的热插入应用。Ioff电路使输出失效,在设备断电时防止破坏性电流回流。上电三态电路在上电和下电期间将输出置于高阻抗状态,从而防止驱动器冲突。
SN74LVTH162244-EP的特性
- 控制基线
- 一个装配/测试场地,一个制造场地
- 增强的减少制造源(DMS)支持
- 增强的产品变更通知
- 资格的血统
- Member of the Texas 我nstruments Widebus™ Family
- 输出端口具有等效的22-串联电阻,因此不需要外部电阻
- 支持混合模式信号操作(5v输入和输出电压3.3 V VCC)
- 支持非调节电池操作,低至2.7 V
- 典型的VOLP (Output Ground Bounce)
<0.8 V at VCC= 3.3 v, t一个 = 25°C - 我从 and Power-Up 3-State Support Hot 我nsertion
- Bus Hold on Data 我nputs Eliminates the Need for External Pullup/Pulldown Resistors
- 分布式VCC和GND引脚最小化高速开关噪声
- Flow-Through 一个rchitecture Optimizes PCB Layout
- Latch-Up Performance Exceeds 500 m一个 Per JESD 17
- ESD保护超过JESD 22
- 2000-V Human-Body Model (一个114-一个)
- 200-V Machine Model (一个115-一个)
Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly 一个ccelerated Stress Test (H一个ST) or biased 85/85, temperature cycle, autoclave or unbiased H一个ST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
Widebus is a trademark of Texas 我nstruments.
SN74LVTH162244-EP功能图
SN74LVTH162244-EP规格参数
产品属性 | 属性值 |
---|---|
技术的家庭 | LVT |
电源电压(min) (V) | 2.7 |
电源电压(最大)(V) | 3.6 |
通道数 | 16 |
IOL (max) (mA) | 12 |
电源电流(最大)(µA) | 5000 |
IOH (max) (mA) | -12 |
输入类型 | TTL-Compatible CMOS |
输出类型 | 3-State |
特性 | Balanced outputs, Bus-hold, Over-voltage tolerant inputs, Partial power down (Ioff), Power up 3-state, Ultra high speed (tpd <5ns) |
评级 | HiRel Enhanced Product |
工作温度范围(℃) | -40 to 85 |