SN74LV4040A-EP中文规格_产品特性_现货专卖
SN74LV4040A器件是一个12位异步二进制计数器,所有级的输出都可以在外部使用。清除(CLR)输入的高电平异步清除计数器并将所有输出重置为低电平。计数是在时钟(CLK)输入的高到低转换上推进的。应用包括延时电路、计数器控制和分频电路。
该设备完全指定为使用Ioff的部分断电应用程序。Ioff电路使输出失效,在设备断电时防止破坏性电流回流。
SN74LV4040A-EP的特性
- 控制基线
- 一个组装
- 测试网站
- 1个制造地点
- Extended Temperature Performance of -55°C to 125°C
- 增强的减少制造源(DMS)支持
- 增强的产品变更通知
- 资格的血统(1)
- 2v到5.5 V的电压CC操作
- 典型的VOLP (Output Ground Bounce) <0.8 V at VCC= 3.3 v, t一个 = 25°C
- 典型的V哦V(输出V哦 Undershoot) >2.3 V at VCC= 3.3 v, t一个 = 25°C
- Support Mixed-Mode Voltage操作 on 一个ll Ports
- 高开关输出电压比
- 开关之间的低串扰
- 单个开关控制
- 极低输入电流
- 我从 Supports Partial-Power-Down Mode操作
- Latch-Up Performance Exceeds 100 m一个 Per JESD 78, Class 我我
- ESD保护超过JESD 22
- 2000-V Human-Body Model (一个114-一个)
- 200-V Machine Model (一个115-一个)
- 1000 v充电器件型号(C101)
(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly 一个ccelerated Stress Test (H一个ST) or biased 85/85, temperature cycle, autoclave or unbiased H一个ST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
SN74LV4040A-EP功能图
SN74LV4040A-EP规格参数
产品属性 | 属性值 |
---|---|
函数 | Counter |
位(#) | 12 |
技术的家庭 | LV-A |
电源电压(min) (V) | 2 |
电源电压(最大)(V) | 5.5 |
输入类型 | Standard CMOS |
输出类型 | Push-Pull |
特性 | Balanced outputs, Over-voltage tolerant inputs, Partial power down (Ioff), Very high speed (tpd 5-10ns) |
工作温度范围(℃) | -55 to 125 |
评级 | HiRel Enhanced Product |