首页 > 新闻资讯 > 新闻详情

STM32MP151C规格参数_产品功能_原装销售

作者： IC先生来源：网络浏览量：64 时间：2023-12-22 09:08:36

概述

STM32MP151C/F器件基于高性能Arm

皮质

-A7 32位RISC内核，工作频率高达800mhz。

Cortex-A7集成了高性能Cortex-A15和Cortex-A17处理器的所有功能，包括硬件虚拟化支持、NEON™和128位AMBA

4 . axis总线接口。

STM32MP151C/F器件也嵌入了Cortex

-M4 32位RISC内核，工作频率高达209 MHz。

单精度数据处理指令和数据类型。

-M4支持全套DSP指令和MPU (memory protection unit)，增强了应用程序的安全性。

STM32MP151C/F器件提供外部SDRAM接口，支持高达8gbit (1gb)密度的外部存储器，16或32位LPDDR2/LPDDR3或DDR3/DDR3L高达533mhz。

STM32MP151C/F器件采用具有708 kb内部SRAM的高速嵌入式存储器(包括256 kb的AXI SYSRAM, 3组128 kb的AHB SRAM，备份域64 kb的AHB SRAM和备份域4 kb的SRAM)，以及广泛的增强I/ o和外设连接到APB总线，AHB总线，32位多AHB总线矩阵和64位多层AXI互连，支持内部和外部存储器访问。

所有器件都提供两个adc，两个dac，一个低功耗RTC, 12个通用16位定时器，两个用于电机控制的PWM定时器，五个低功耗定时器，一个真正的随机数发生器(RNG)和一个加密加速单元。

STM32MP151C符号图

STM32MP151C

STM32MP151C功能参数

内核
- 32-bit Arm^® Cortex^®-A7
  - L1 32-Kbyte I / 32-Kbyte D
  - 256-Kbyte unified level 2 cache
  - Arm^® NEON™ and Arm^® TrustZone^®
- 32-bit Arm^® Cortex^®-M4 with FPU/MPU
  - Up to 209 MHz (Up to 703 CoreMark^®)
Memories
- External DDR memory up to 1 Gbyte
  - up to LPDDR2/LPDDR3-1066 16/32-bit
  - up to DDR3/DDR3L-1066 16/32-bit
- 708 Kbytes of internal SRAM: 256 Kbytes of AXI SYSRAM + 384 Kbytes of AHB SRAM + 64 Kbytes of AHB SRAM in Backup domain and 4 Kbytes of SRAM in Backup domain
- Dual mode Quad-SPI memory interface
- Flexible external memory controller with up to 16-bit data bus: parallel interface to connect external ICs and SLC NAND memories with up to 8-bit ECC
Security/safety
- Secure boot, TrustZone^® peripherals, active tamper
- Cortex^®-M4 resources isolation
Reset and power management
- 1.71 V to 3.6 V I/Os supply (5 V-tolerant I/Os)
- POR, PDR, PVD and BOR
- On-chip LDOs (RETRAM, BKPSRAM, USB 1.8 V, 1.1 V)
- Backup regulator (~0.9 V)
- Internal temperature sensors
- Low-power modes: Sleep, Stop and Standby
- DDR memory retention in Standby mode
- Controls for PMIC companion chip
Low-power consumption
- Total current consumption down to 2 µA (Standby mode, no RTC, no LSE, no BKPSRAM, no RETRAM)
Clock management
- Internal oscillators: 64 MHz HSI oscillator, 4 MHz CSI oscillator, 32 kHz LSI oscillator
- External oscillators: 8-48 MHz HSE oscillator, 32.768 kHz LSE oscillator
- 5 × PLLs with fractional mode
General-purpose input/outputs
- Up to 176 I/O ports with interrupt capability
  - Up to 8 secure I/Os
  - Up to 6 Wakeup, 3 tampers, 1 active tamper
Interconnect matrix
- 2 bus matrices
  - 64-bit Arm^® AMBA^® AXI interconnect, up to 266 MHz
  - 32-bit Arm^® AMBA^® AHB interconnect, up to 209 MHz
3 DMA controllers to unload the CPU
- 48 physical channels in total
- 1 × high-speed general-purpose master direct memory access controller (MDMA)
- 2 × dual-port DMAs with FIFO and request router capabilities for optimal peripheral management

Up to 35 communication peripherals
- 6 × I²C FM+ (1 Mbit/s, SMBus/PMBus)
- 4 × UART + 4 × USART (12.5 Mbit/s, ISO7816 interface, LIN, IrDA, SPI slave)
- 6 × SPI (50 Mbit/s, including 3 with full duplex I²S audio class accuracy via internal audio PLL or external clock)
- 4 × SAI (stereo audio: I²S, PDM, SPDIF Tx)
- SPDIF Rx with 4 inputs
- HDMI-CEC interface
- MDIO Slave interface
- 3 × SDMMC up to 8-bit (SD / e•MMC™/ SDIO)
- 2 × USB 2.0 high-speed Host+ 1 × USB 2.0 full-speed OTG simultaneously
  - or 1 × USB 2.0 high-speed Host+ 1 × USB 2.0 high-speed OTG simultaneously
- 10/100M or Gigabit Ethernet GMAC
  - IEEE 1588v2 hardware, MII/RMII/GMII/RGMII
- 8- to 14-bit camera interface up to 140 Mbyte/s
6 analog peripherals
- 2 × ADCs with 16-bit max. resolution (12 bits up to 4.5 Msps, 14 bits up to 4 Msps, 16 bits up to 3.6 Msps)
- 1 × temperature sensor
- 2 × 12-bit D/A converters (1 MHz)
- 1 × digital filters for sigma delta modulator (DFSDM) with 8 channels/6 filters
- Internal or external ADC/DAC reference V_REF+
Graphics
- LCD-TFT controller, up to 24-bit // RGB888
  - up to WXGA (1366 × 768) @60 fps or up to Full HD (1920 × 1080) @30 fps
  - Pixel clock up to 90 MHz
  - Two layers with programmable colour LUT
Up to 25 timers and 3 watchdogs
- 2 × 32-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 2 × 16-bit advanced motor control timers
- 10 × 16-bit general-purpose timers (including 2 basic timers without PWM)
- 5 × 16-bit low-power timers
- RTC with sub-second accuracy and hardware calendar
- 4 Cortex^®-A7 system timers (secure, non-secure, virtual, hypervisor)
- 1 × SysTick M4 timer
- 3 × watchdogs (2 × independent and window)
Hardware acceleration
- AES 128, 192, 256, TDES
- HASH (MD5, SHA-1, SHA224, SHA256), HMAC
- 2 × true random number generator (3 oscillators each)
- 2 × CRC calculation unit
Debug mode
- Arm^® CoreSight™ trace and debug: SWD and JTAG interfaces
- 8-Kbyte embedded trace buffer
3072-bit fuses including 96-bit unique ID, up to 1184-bit available for user
All packages are ECOPACK2 compliant